Surgical Tables, Mediland Hospital Equipments, Surgery Tables.

AMAX 9000
Amax 9000 surgical table is designed to provide the complete flexibility for patient positioning required for modern surgeries with the most advanced engineering technology. With her features of safety, stability, versatility, and convenience, Amax 9000 facilitates the planning of operating theaters in a hospital. The table height of Amax 9000 is from 680mm to 1112mm, and its maximum loading weight is 454 Kg(1000 lbs). All the tabletop movements can be adjusted by the hand control, foot pump, or override switch, thus the safety and reliability during surgery is guaranteed.

Amax 9000 provides the following advanced features

A universal electrohydraulic surgical table fully meets the IEC 60601-2-46, and gets the ETL certification.

Advanced 4-sections design: the hydraulic system drives all tabletop sections except for the head section. There are 14" x 17" X-ray cassette tunnels under the back and leg sections, and makes the translucent area up to 85% of tabletop.

Complete flexion design: the included angle of flex position is up to 220 ° and is a typical European-style design. Furthermore, the powered kidney elevator between the back and pelvis section perfectly meets those surgeons used to the American-styled surgical table.

Agile and stable: 4 large-sized conductive swivel casters provide the excellent mobility. With the powered hydraulic floor-LOCK system, the table is very stable when floor-LOCK is locked.

Plentiful power: the built-in battery is for 1 week of operation (approx. 50~80 procedures) when fully charged, and perfectly meets the trend of cordless floor in the modern surgical room.

Ergonomics: the T-Shaped table base provides more legroom for surgical team access. The powered leg section is capable of rotating down to 105° to increase more accessibility for the surgeon to the perineal area.

Pressure management pads: the conductive, fire retardant, and germproof pads prevent the pressure sore from lengthy procedures.

PA900 Orthopedic Extension: the particular trolley design facilitates the preparation work of the orthopedic procedure.

General position

General surgery,

brain surgery,

ophthalmologic surgery,

urology surgery,

gynecology,

laparoscope surgery,

and thoracic surgery.

Full body C-Arm imaging

Ophthalmologic procedure using the Neurosurgery Horseshoe Headrest. Low table (680mm) position for use of a microscope.

Cardiac and thoracic surgery using kidney bar to support the chest.

Urology procedure using the pneumatic assisted leg holder for any positioning articulation.

Prone position for craniotomy using the Neurosurgery Horseshoe headrest. Amax9000 can be used with a Mayfield headrest also.

Accessories AMAX 9000


PA01 Clark socket, for 9mm(W) × 25mm(H) side rail.	PA02 Clamp, for 9mm(W) × 25mm(H) side rail.	PA03 Anesthesia screen	PA04 Shoulder brace (left)	PA05 Shoulder brace (right)

PA06 Arm board, for 9mm(W) × 25mm(H) side rail.	PA07 Lateral brace	PA08 Leg holder	PA11 Restraint strap	PA12 Infusion stand

PA13 Horseshoe headrest	PA14 Multitask arm board	PA15 Cylindrical thigh rest	PA17 Accessory Trolley	PA24 Clark socket, for 38” (W) × 118” (H) side rail.

PA25 Clamp, for 38” (W) × 118” (H) side rail.	PA26 Arm board, for 38” (W) × 118” (H) side rail.	PA27 Dorsal operation pad	PA29 Microscopic Operation Frame For Hand Operation, for 38” (W) × 118” (H) side rail.	PA35 Mattress, for Amax 9000

PA38 Kneeling-position Supporter for Amax 9000	PA41 Drain pan	PA42 Headrest adaptor	PA43 Cassette tops, for Amax 9000	PA900 Orthopedic extension device

PA45 Headrest for plastic operation	PA48 Carbon arm board, for 38” (W) × 118” (H) side rail.	PA49 Compact arm board, for 38” (W) × 118” (H) side rail.	PA53 Foot control device

Surgical Table C600

Mediland brings innovative design and a rich combination of features to the C600 surgical table. With a variety of accessories and tabletop configurations, the C600 makes itself ideal in handling all modern procedures.

Advantages of the C600:

DIVERSITY: To meet different surgical needs, the C600 has 3 different tabletop models, each configurable with up to 3 optional functions.

PATIENT ARTICULATION CAPACITY:Movement of the C600 is hydraulic-driven. Its mechanism allows the C600 to hoist patient weights up to 227kg (500lb) in full articulation of table movements.

FULL TABLETOP LENGTH CASSETTE TUNNEL:The entire tabletop of the C600 is radiolucent. Its 14”×17” full table length cassette tunnel can be complemented by an optional sliding function (/S models) facilitate C-arm application.

FULL TABLE FUNCTIONS AND COMPELTE CONTROLS:The C600 has many table operating controls including a standard corded hand control, an optional infrared remote control and an optional foot control. An auxiliary control on the base provides back-up should electronic controls ever fail.