Cisa S.p.A. has been producing and selling sterilization systems for over 60 years for both hospitals and industrial sector, covering all sterilization needs.
Cisa is part of an Industrial Group, headed by the entrepreneur Fabio Perini, which manufactures industrial machinery and integrated production systems with factories in 4 continents and its headquarters in Lucca (Italy).
The Company offers capillary distribution and technical assistance both in Italy and overseas that allows it to guarantee constant presence and a complete service in all the countries in which it operates.
Sterilization Units- Autoclave Series 200H
Description Horizontal bench top steam sterilizer Pre Vacuum steam sterilizer Suitable for use ss flash sterilizer in areas that equire small load terilization, operating room, dental clinic, laboratory, out patient clinics and small medical centres. Fully automatic, Microprocessor-Controlled Pre Programmed cycles at 121 and 134 °C With drying phase at the end of cycle, for wrapped and unwrapped material Sterilization chamber made in stainless steel External body made in Stainless Steel Single hinged door with safety nterlock Electric Heating Built-in Vacuum pump for pre and post acuum Touch screen (LCD) control and display for cycle selection and display of cycle parameters (Temperature pressure, time and Phase) and cycle status. Audio-Visual alarm with self-ccheck Water eservoir or reated water Built-In printer or cycle documentation High safety features as per European Standards with over eat and over ressure protection 110-220 V, Ph, 50-60 HZ
Sterilization Plasma System
An innovative system to sterilize medical devices at low temperature
The effectiveness of a sterilization process is crucial to avoid the risks arising from the use of medical devices on the human body. Moreover, if the sterilization process takes place at low temperature difficulties multiply. This is the reason why Cisa has carried on a program of research and development whose aim is to assemble an innovative piece of equipment which permits to deal with and solve the problem in terms of effectiveness, safety, applicability, versatility, productivity and inexpensiveness.
The principle underlying of the functioning of this new machine is PLASMA, the fourth state of the matter. It is a technology that has been known for a long time and that has turned out to be the ideal basis to develop a piece of sterilization equipment with innovative performances.
During the sterilization cycles at low temperature the PLASMA assisted by a solution based on hydrogen peroxide makes it possible to have results that are by far better than those obtained with the other known technologies.
The performing speed of the sterilization cycles and the ready availability of use of the devices are such that it is possible to quickly rotate these devices, thus reducing considerably the time of performance for surgical operations.
Series K-2
The technology featured in every Cisa machine isn’t only limited to the digital process control.
The Cisa research team has also dedicated a lot of effort to the structure and construction of the machines. A thorough choice of materials and components guarantee the safety and durability of the machine under every circumstance. All Cisa machines are manufactured with the same standards of hygiene and dependability with the same standards of hygiene and dependability and feature amongst others, the following characteristics:
Washing and disinfecting chamber in stainless steel chromenickel-molybdenum-titanium has a opened profile to permit a easy cleaning and drainage operation
Mirror finish electrolytic polishing treatment
Pneumatic closure of the washing and disinfecting chamber with automatic safety locking and vertical sliding door.
Pure self-lubricating silicone gaskets
Non toxic fire resistant insulation foam, with extremely low thermal conductivity and no release of particles.
Pneumatic closure of the washing and disinfecting chamber
Washing and disinfecting chamber in special execution to consent the containment of the washing solution
Inspect door realized In glass tested for the security to the resilience to the high temperatures and noise
Chamber with illumination to check the materials exposed to the washing and disinfecting process
Main supporting frame, front and internal panels in stainless steel chrome-nickel-molybdenum
Compact architecture with overall dimension always in relation to the machine capacity
Effortless installation with easy of positioning on the floor and connection to the main utilities
Frontal charger for the internal trolley with reduced request of space for the installation
Electro valve or pneumatic value to intercept the fluids
Pre-heating of the demineralized water to reduce the time of the cycle
Water distribution is separate for internal trolley’s harm and for the chamber through two pump of the re-circle
Dosage dispositive for four additives and each one of them is composed from a peristaltic dosage pump, level control and capacity gauge
Automatic filling device of the washing and disinfecting chamber on each one phase
The heating of washing and disinfecting solution and disinfecting of dryer air through electric resistance or of heat exchanger fed with vapour
Drying device to the elevate efficiency composed from two team totally separated and completed of pre-filter, absolute filter, ventilator and heater for the chamber and the internal trolley
Air de-humidity device working with a heat exchanger fed electronically
Valve or pump for washing and disinfecting chamber unloading
Drain cooling device to guarantee the admissible value of the drain temperature of the machine
Basin rim for the gathering and the to the drain of eventual liquid
Auto select of washing and disinfecting cycles more appropriate for the different special internal trolley with magnetic codes reading system
Calculation of the A0 for each working cycle to verify the lethal degree and the reaching of disinfecting degree
Printer alphanumeric for dates recording
640 HB Series
Description Free standing, high pressure steam sterilizer
Fully automatic PLC-microprocessor controlled
Touch-screen technology for control and display of cycle selection and display of cycle parameters(temperature, pressure, time, phase in progress , cycle parameter management, maintenance management, alarm history and reset, real time diagram and steam saturation percentage)
Pre programmed and set of open programmable cycles
Chamber, jacket and door made of stainless steel AISI 316Ti
External body in stainless steel
Built-In printer for cycle documentation
Built-in vacuum pump for pre-vacuum air removal and for final drying
High safely level, audio-visual alarm with alarm history and self-check
Horizontal bench top steam sterilizer
